Subnet mask 255.255.255.0
Default gateway 192.168.0.1
Setting the IP addresses of the devices
Configuring the settings using the menus
Set the IP address of the unit (ROP) in [ROP IP SETTING] under the ROP menu.
“36 ROP IP SETTING” (see page 116)
For the IP address of the CCU, refer to the operating instructions for the CCU.
Configuring the settings using Easy IP Setup Software
Use Easy IP Setup Software to set the IP address of each device.
“Easy IP Setup Software” (see page 130)
Configuring various settings of the ROP
Use ROP Setup Software to configure various settings.
“ROP Setup Software” (see page 132)
- 129 -
Software
To Next Page
Loading...
Need help?
General
