19 UHD DETAIL
The control destination differs depending on the unit configuration.
When the camera is an AK-UC4000
The control is performed for the camera.
When the camera is other than the above
The control is performed for the CCU.
The setting values will vary depending on the connected camera.
ヶラュチュユヵモリロ
ヒチバチビ
ュユヵモリロチロヷ
ピビパビパ
フブ
パパ
ュユヵモリロ
ヮモヴヵユン
ュユヵモリロ
ヱユモレ
ョンヲ
ヤンリヴヱ
ラヷ
ヤロリヱヌヤロリヱノ
ヰョョ
ヶラュチュユヵモリロ
ビチバチビ
ブ
ベ
パ
パ
レワユユ
モヱユヵヶンユ
ュユヵモリロ
レワユユ
ロユヷユロ
ュユヱユワュユワヵ
ュモンレ
ュユヵモリロ
ヰョョ
ュユヵモリロ
ヰョョ
ロヷチュヱワ
ヴヸ
ヰョョ
ュハュヵロ
ヴヸ
ヰョョ
Item Setting details
MASTER DETAIL Adjusts the level of master detail.
DETAIL LV H Adjusts the level of horizontal detail.
DETAIL LV V Adjusts the level of vertical detail.
PEAK FRQ Selects the contour correction frequency band (boost frequency or peak frequency). Changes the contour
width.
CRISP Set the noise elimination level for the detail signals.
DETAIL CLIP+ Adjusts detail clipping to minimize scintillation resulting from excessive detail application.
DETAIL CLIP- This limits the length of the undershoot portion of the detail edge component.
KNEE APERTURE Adjusts the knee aperture level.
DETAIL KNEE Adjusts the knee detail component.
LEVEL DEPENDENT Removes dark details.
Cannot be set simultaneously with [DARK DETAIL].
DARK DETAIL Set the level of dark detail enhancement.
Cannot be set simultaneously with [LEVEL DEPENDENT].
DETAIL Enables or disables the UHD detail effect.
LV DPN SW Removes dark details.
D. DTL SW Enhances dark details.
- 86 -
ROP menu
To Next Page
Loading...
Need help?
General
