All settings
Setup
Anti Image retention
MENU Menu > Setup > Anti image retention
Settings Options Description
Pixel orbiter Disable/
Enable Enable: Shifts the display image automatically.
4:3 side bars
(4:3 mode only)
Off/Dark/Mid/
Bright
Changes the brightness of the side bar
The recommended setting is "Bright" to prevent
the panel "Image retention".
Do not display a picture in 4:3 mode for an
extended period, as this can cause "Image
retention" to remain on either or both sides of the
display field. To reduce the risk of such "Image
retention", change the brightness of the side bars.
The side bar may flash (alternate black/white)
depending on the picture.
Scrolling bar
Press "OK" to start the horizontal "Scrolling" on
the screen. Press any key except the POWER key
to return to previous screen. You will return to the
previous screen if no key operation has been
performed for 15 minutes.
To Next Page
Loading...
Need help?
General