Watching TV
Blu-ray, DVD, Game Console, etc.
Connecting and viewing (2)
2.
Select Input
1. Display Input select menu (With the connected equipment turned ON)
INPUT
2. Select the input used in step 1
Select correct input source, using / and press
You can also press the corresponding NUMBER button or press INPUT
repeatedly to cycle through the available inputs. If you are unsure which input to
select, wait 2 seconds between each selection.
Component and Composite (Video) IN terminals are shared.
You need to select Video or Component.
(Default: Video)
Press INPUT and select Video <-> Comp.
Press / to choose Video or Component.
For your convenience, you can edit the inputs with labels that are easy to
remember.
Edit Labels Set ANT/Cable in
3. Operate using your device's remote control.
To Next Page
Loading...
Need help?
General