3.70
ENGINE / COOLING SYSTEM
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
9. Inspect drive surface of starter gear (D) and bearing
surface (E) for wear, damage, or uneven surface. If
any star ter clutch com ponent is wor n or d amaged,
replace clutch, clutch hub, and starter gear.
Starter One-Way Clutch Installation
1. Install one-way clutch in clutch hu b with fla nge of
clutch (F) engaged in recess.
IMPORTANT: The one -way clutch can be in stalled
int
o t he hub inc orrectly. This will ca use eng ine
cranking issues.
2. Clean screw threads in flywheel to remove all oil or
grease.
3. Apply Loctite® 272™ on the (3
) bolts. Place hub on
flywheel and install (3) bolts.
4. Torque screws to specification.
One Way Clutch Retaining Bolts:
9 ft. lbs. (12 Nm)
Apply Loctite® 272™
To Next Page
Loading...
Need help?
General
