2.28
MAINTENANCE
9923523 - RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
7. Remove the h ose and completely drain the engine.
Reinstall the lower coolant hose.
8. Properly dispose of the coolant.
9. Remove the pressure cap. Using a funnel, add the
recommended c
oolant to the top of the filler neck and
fill the recovery bottle to the MAX level.
10. Refer to Chapter 3 for the “Cooling System Bleeding
Pr
ocedure”.
FINAL DRIVE / WHEEL AND TIRE
Wheel and Hub Torque Table
NOTE: Do not lubricate the stud or the lug nut.
Wheel Removal
1. Position the vehicle on a level surface.
2. Place the tra nsmission in PARK (P) and stop th e
eng
ine.
3. Loosen the wheel nuts slightly. If wheel hub removal
is r
equired, remove the cotter pin and loosen the hub
nut slightly.
4. Elevate the appropriate side of the vehicle by placing
a
suitable stand under the frame.
5. Remove the wheel nuts and remove the wheel.
6. If hub removal is re quired, remove the hub nut and
wa
shers.
Polaris Premium Antifreeze
2871534 - Quart
2871323 - Gallon
Wheel Nuts:
Steel Wheels: 27 ft. lbs. (37 Nm)
Aluminum Wheels: 30 ft. lbs. + 90° (1/4 turn)
Hub Retaining Nuts:
80 ft. lbs. (108 Nm)
To Next Page
Loading...
Need help?
General
