Polaris 2012 RANGER RZR 570 INTL User Manual

7.29
FINAL DRIVE
7
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Bearing Carrier Installation
1. Install d rive sha ft a xle thr ough the ba ckside of the
bearing carrier. Be sure bushings and pivot tubes are
installed.
2. Install the fasteners that attach the rear bearing carrier
to the up
per and lower A-arms. Torque NEW nuts to
specification.
3. Apply grease to drive shaft axle splines.
4. Install rear wheel hub assembly, cone washers, and
ha
nd t ighten th e castle n ut. Install w ashers wit h
domed side out.
5. Install new
brake caliper mounting bolts and torque to
44 ft. lbs. (60 Nm).
= T
Upper and Lower Rear Bearing Carrier Nuts:
40 ft. lbs. (54 Nm)
= T
Rear Caliper Mounting Bolts:
44 ft. lbs. (60 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
Out
Cone Washers
Wheel
Hub
44 ft. lbs.
60 (Nm)

Polaris 2012 RANGER RZR 570 INTL Specifications

General

Brand	Polaris
Model	2012 RANGER RZR 570 INTL
Category	Offroad Vehicle
Language	English