3.85
ENGINE / COOLING SYSTEM
3
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
4. Tap crankcase evenly until fu lly se ated with a soft
sided hammer.
5. Install th e (1 5) ne
w crankcase bo lts fin ger tig ht in
MAG side crankcase.
6. Tighten all bolts evenly until snug.
7. Torque th e ne
w crankcase bolt s to in sequenc e to
specification.
8. Install the engine stand adapter (PU-50824) onto the
e
ngine PTO side mounting ears as shown below.
9. Select th e pr oper eng ine stan d slee ve ada pter and
in
stall it onto the engine stand adapter.
• Sleeve adapter for a 2” bore engine stand:
(PU-50625)
• Sleeve adapter for a 2.375” bore engine stand:
(PW-47054)
10. Place engine onto the engine stand (PU- 50624) for
to
p end engine assembly as outlined in this chapter.
Crankcase Bolts (In Sequence):
22 ft. lbs. (30 Nm)
PU- 50824
Bolts From The
Center Outward
To Next Page
Loading...
Need help?
General
