Polaris 2012 RANGER RZR 570 INTL User Manual

7.11
FINAL DRIVE
7
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
5. Install the upper pinch bolt and torque to specification.
6. Apply grease to drive shaft axle splines.
7. Install front wheel hub assembly, cone washers, and
h
and tighten th e ca stle nut. Insta ll washers with
domed side out.
8. Torque wh eel h ub n ut to spe cification and install a
ne
w cotter p in. Tigh ten n ut slightly if ne cessary to
align cotter pin holes.
9. Install b rake calipe r m ounting b olts and tor que to
specification.
10. Install wheel and (4) wheel nuts. Torque wheel nuts
to spec
ification.
11. Rotate wheel and check for smooth operation. Bend
b
oth en ds of cotte r pin around end of sp indle in
different directions.
= T
Ball Joint Pinch Bolts:
23 ft. lbs. (31 Nm)
23 ft. lbs.
(31 Nm)
Out
Cone Washers
Wheel
Hub
= T
Wheel Hub Castle Nut:
80 ft. lbs. (108 Nm)
= T
Front Caliper Mounting Bolts:
31-34 ft. lbs. (42-46 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
= T
Wheel Nuts:
Steel Wheels: 27 ft. lbs. (37 Nm)
Aluminum Wheels: 30 ft. lbs. + 90° (1/4 turn)
80 ft. lbs.
NEW Cotter Pin
(108 Nm)

Polaris 2012 RANGER RZR 570 INTL Specifications

General

Brand	Polaris
Model	2012 RANGER RZR 570 INTL
Category	Offroad Vehicle
Language	English