Postage Imprint Default Set-
tings
8.9
The settings of the postage imprint 'by default' include:
• Imprint default settings: sets the default rate, ERA and slogan for mailing operations.
• Automatic Date Advance: enables early date change to continue printing postage
with the new date after post office closing hours
• Printing offset: sets the default offset print position from the right side of the envelope.
Imprint Default Settings
You can set default parameters for the imprint elements that follow:
• Rate
• ERA
• Slogan
On list screens, a mark indicates the default parameter.
Changing the Default Rate
Use the procedure below to change the rate the machine activates at start-up.
How to Change the Default Rate
To change the default rate:
1. As supervisor (see How to Log in as Supervisor on page 144):
Press and select the path: Default user settings Default imprint
parameters Default rate
2. Select [Next].
3. Select the default rate using the rate wizard.
4. Press [OK] to validate.
See also
• Managing Postal Rates on page 188.
164
| Page 164 | Jul-31-2018 12:32 |
8
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
