quadient iX-5 Series User Manual

Running [Pass Through] Mail3.5
In Running [Pass Through] Section
This section describes how to use the [Pass Through] type of imprint, for:
• Sealing envelopes using the auto-feeder sealer (if installed).
• Only conveying mail, for counting or testing purposes.
See also
• About the use of the Type of imprint, see Choosing a Type of Imprint on page 31.
Setting [Pass Through] Mail processing
The procedure below outlines steps required to process mail.
You must begin with selecting the Type of imprint to gain access to the corresponding
parameters and be able to run mail.
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session on page 33.
How to Set [Pass Through] Mail processing
Main setting:
1. Make sure you are on the home screen of the [Pass Through] type of imprint.
The type of imprint is indicated at the top of the home screen as illustrated.
57
| Page 57 | | Jul-31-2018 12:32 |
3
Processing Mail

quadient iX-5 Series Specifications

General

Brand	quadient
Model	iX-5 Series
Category	Postal Equipment
Language	English