quadient iX-5 Series User Manual

Using the Feeder
You may use a feeder to load the mail pieces automatically.
The procedure below describes how to place a stack of mail pieces in the Hopper.
Depending on the weighing method you choose to run mail, you may have to insert the
envelopes one by one or place a stack of envelopes in the hopper.
How to Use the Feeder
Feeding a stack of mail pieces:
1. Fan the envelopes to separate them.
2. Bevel the edge of the stack.
3. Place the envelopes in the hopper, their upper edge resting against the rear guide.
3
Processing Mail
39
| Page 39 | Jul-31-2018 12:32 |

quadient iX-5 Series Specifications

General

Brand	quadient
Model	iX-5 Series
Category	Postal Equipment
Language	English