Adjusting the Sealing Water Flow
Before you adjust the sealing water flow, make sure that the brushes and sponge are clean
(see How to Clean the Brushes and Sponge (Sealer) on page 205).
How to Adjust the Sealing Water Flow
To adjust the sealing water flow:
1. Set the water flow using the back lever.
When standing in front of the feeder:
- Push the lever towards the left-hand side to increase the water level.
- Push the lever towards the right-hand side to decrease the water level.
204
| Page 204 | Jul-31-2018 12:32 |
10
Maintaining your Mailing System
To Next Page
Loading...
Need help?
General
