Raisecom RC3000 PCM User Manual

Raisecom Technology Co., Ltd
83
Can not save data to EEPROM.
10.18. Version
In main menu press number key 7 to get version information:
1.Display Version information
Version Information
Command: 1-1, Menu Display: M, Return: Q Command:
10.18.1. Display Version information
In version menu press number key 1 to show device version information:
Hardware Version:REV A.00
Software Version:REV A.0
Version Information
Command:1-1, Menu Display:M, Return:Q Command:
10.19. Console Set menu
In main menu press number key 8 there will be console set menu:
1.Language Select
2.Password Set
Console Set Command:1-2, Menu Display:M, Return:Q Command:
10.19.1. Language Select
In console set menu press number key 1 to select language:
Language Select: English
In this status use → key to change the language (English and Chinese), press
ENTER to confirm.
10.19.2. Password Set
In console set menu press number key 2 to change the password:
Input Old Password:
Enter your password and press ENTER to confirm (there will be * prompt for each
entered character). If the password is wrong, there will be:
Input password error or input illegal charactor.
If right, there will be:
Input New Password::

Raisecom RC3000 PCM Specifications

General

Brand	Raisecom
Model	RC3000 PCM
Category	Multiplexer
Language	English