102
4
Part of
Practice
Printing with Crop Marks
Printing with Crop Marks
The media printed with a crop mark can be set on and cut with the cutting device.
(Example: You can re-set and cut a media with laminate processing after printing.)
Use your software RIP to make the settings for printing crop marks. For information on how to make the set-
ting, refer to the documentation for the software RIP you're using.
The crop marks are printed as shown in the gure.
Alignment marks and symbols drawn using a graphics program cannot be used as crop marks.
Crop Mark
(Align point 3)
Crop Mark
(Align point 1)
Crop Mark
(Align point 2)
Crop Mark
(Base point)
To Next Page
Loading...
Need help?
General