Roland VersaArt RE-640 User Manual

110
5
To Administrators
System Management of Printer
Setting for the Menu Language and the Units of Measurement
This sets the language and units of measurement displayed on the display screen of the operation panel.
Procedure

Hold down and switch on the sub power.

Use to select the display (menu) language.
Press
to enable the setting.

Use to select the measurement unit for
length.
Press
to enable the setting.

Use to select to the measurement unit for
temperature.
Press
to enable the setting.
Default Setting
[MENU LANGUAGE]: ENGLISH
[LENGTH UNIT]: mm
[TEMP. UNIT]: °C
Setting the Interval until Activation of the Sleep Mode (Power Saving Function)
Procedure

Press .

Press several times to display the left gure.
Press
.

Press several times to display the left gure.
Press
twice.

Use to make the setting.
Press
to enable the setting.

Press to go back to the original screen.
Default Setting
[INTERVAL]: 30min
LENGTH UNIT
mm
INCH
TEMP. UNIT
C
F
MENU
SUB MENU
SUB MENU
SLEEP
INTERVAL
30min
15min
W1200mm
SETUP SHEET

Roland VersaArt RE-640 Specifications

General

Brand	Roland
Model	VersaArt RE-640
Category	Printer
Language	English