3
Maintenance
Maintenance that Should Be Performed More Than Once a Month
66
Manual Cleaning of Print Head
CAUTION
Be sure to perform operations as specied by the instructions above,
and never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
1.
Change to the print-head manual-cleaning menu.
Remove any media.
Press .
Press several times until the screen shown on
the left appears.
Press
, and then .
Press .
Press .
Important Notes on This Procedure
Before attempting this operation, remove any media.
To prevent the heads from drying out, nish this procedure in 30 minutes or less. A warning beep
sounds after 30 minutes.
Never use any implement other than the included cleaning stick. Cotton swabs or other lintpro-
ducing items may damage the heads. If you use up the cleaning stick, purchase a new one from
your authorized Roland DG Corp. dealer.
Never immerse a cleaning stick that has already been used to perform cleaning in the cleaning
liquid. Doing so may degrade the cleaning liquid.
Do not put the cleaning stick used for cleaning into the cleaning uid. It will deteriorate the
uid.
Never rub the nozzle surface of the print head.
Stroke the sponges very gently, applying as little pressure as possible. Never rub, scrape, or crush
them.
When a warning beep sounds during cleaning
A warning beep sounds in 30 minutes after the operation is started. At this time, stop work, and
follow the procedure in step.
4
on page 69 to attach cover L and cover R, then close the front
cover. Press
to quit the manual-cleaning menu. After that, restart the procedure from
the beginning.
To Next Page
Loading...
Need help?
General