2
Basic
Operation
56
Switch Off
Switch Off
WARNING
When output is not being performed, remove any loaded media or switch
off the sub power.
The continued application of heat at a single location may cause the release
of toxic gases from the media or pose a re hazard.
Procedure
Switch off the sub power whenever output
is nished.
Hold down the sub power button for one second
or longer.
Raise the loading lever.
Even except for switching o the power, raise the
loading lever.
Leave the main power switched on at all times.
Never switch o the main power. By switching on the main power, the automatic maintenance function
is carried out periodically. If the automatic maintenance is not carried out, it may result in breakdown
of this machine such as breakdown of the print head.
Never switch off the main power or unplug the power cord suddenly while operation
is in progress.
Switching o the main power or unplugging the power cord suddenly while operation in progress
may damage the print head. Be sure to rst switch o the sub power.
If the main power is accidentally switched o, immediately turn the power back on.
To Next Page
Loading...
Need help?
General