Output Operation Management
5
To
Administrators
108
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed
Set to display
every time when a media is changed.
Procedure
Press .
Press to display the left gure.
Press
.
Press
twice.
Press .
Press to select "ENABLE".
Press
to enable the setting.
If you set to "ENABLE," you must set the [SHEET TYPE] menu to "OPAQUE."
P. 95, "Using Transparent Media"
Press to go back to the original screen.
Description
Setting this menu to "ENABLE" can keep you from forgetting to redo the setting when you change the media.
Be sure, however, also to set the [SHEET TYPE] menu (refer to P. 95, "Using Transparent Media") to "OPAQUE."
When [SHEET TYPE] is set to "CLEAR," [SHEET REMAIN] is not displayed automatically.
AUTO DISPLAY
DISABLE
ENABLE
To Next Page
Loading...
Need help?
General