2
Basic
Operation
Loading Media
41
Performing the Initial Adjustment (Correcting for Misalignment in Bidirectional Printing More Precisely)
Perform the initial adjustment (correction for misalignment in bidirectional printing more precisely) of this
machine. In the following case, perform this adjustment.
When using this machine for the rst time
When changing the media to use for the rst time
When further correction is required to improve printing, such as when simple correction is performed for
misalignment in bidirectional printing. P. 91, "Correcting for Misalignment in Bidirectional Printing"
Procedure
Press .
Press several times to display the left gure.
Press
, and then .
Press .
Press .
A test pattern is printed.
When printing ends, then press .
Press .
Press to select a correction value of
No.1.
Press
.
Press
to select a correction value of
No.2.
Press
.
ADJUST BI-DIR
DETAIL SETTING
DETAIL SETTING
TEST PRINT
ADJUST BI-DIR
DETAIL SETTING
NO.1 NO.2
‑ 6 ‑ 4
To decide a Correction Value
Choose the value that produces the least misalignment of 2lines.
H1
NO.1
H1
NO.2
H1
NO.3
H1
NO.4
H1
NO.1
Correction-value scale
Choose the value that produces
the least misalignment.
Current correction value
To Next Page
Loading...
Need help?
General