Fully Utilizing Preset Function
4
Part of
Practice
86
Loading a Saved Preset
Procedure
Press .
Press several times to display the left gure.
Press
twice.
Press to select a name to be called.
Press
to enable the setting.
The settings are changed and the screen shown in the gure ap-
pears.
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been as-
signed, you select from among NAME1 through NAME8.) If you load a preset while is illuminated, goes dark.
If this happens, raise the loading lever, make sure the media is loaded straight, then lower the loading lever
again to make output possible.
To Next Page
Loading...
Need help?
General