2
Basic
Operation
Outputting
54
Pausing and Canceling Output
You can pause and cancel printing before it nishes. We do not recommend resuming printing because hori-
zontal stripes are produced at the place where output stopped.
Procedure
Press before output nishes.
This pauses printing operation.
Press again to resume printing.
To cancel the output, go the next Procedure without pressing .
When the screen shown in the gure appears, hold down
for one second or longer.
This cancels printing operation.
Stop sending the output data from the computer.
Cutting Off the Media
Procedure
Close the front cover.
Make sure lights up.
Press .
Press to display the left gure.
Press
.
When the media clamps are attached, the screen shown in the gure ap-
pears. Open the front cover and detach the left and right media clamps.
TO CANCEL, HOLD
DOWN PAUSE KEY
FUNCTION
SHEET CUT
REMOVE
MEDIA CLAMPS
To Next Page
Loading...
Need help?
General