Phone Basics
2A. Phone Basics 13
Turning Your Phone On and Off
Turning Your Phone On
䊳 Slide the Power/Lock button ( ) down for two seconds
until the keypad lights up.
– or –
Open the phone and press .
Once your phone is on and finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. When a
signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key except numbered keys.
Turning Your Phone Off
䊳 Unlock the keypad by sliding the Power/Lock button ( )
down, and then hold down until you see power off
message on the display screen.
– or –
Open the phone and press and hold for two seconds.
Your screen remains blank while your phone is off unless the
battery is charging.
Battery and Charger
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It
allows you to recharge your battery before it is fully drained. The
battery provides up to 5.1 hours of continuous digital talk time.
Tip
The Power Save feature conserves your battery power when you
are in an area where there is no signal.
WARNING
Use only manufacturer-approved batteries and chargers
with your phone. The failure to use a manufacturer-
approved battery and charger may increase the risk that
your phone will overheat, catch fire, or explode, resulting
in serious bodily injury, death, or property damage.
To Next Page
Loading...
Need help?
Power
Connectivity
Camera
Weight and Dimensions
