Phone Basics
2A. Phone Basics 21
Using the Internal Keypad
1. From standby mode, enter a phone number and press
OPTIONS
(right softkey)
> Save
.
2. Select
New Entry
or
Existing Entry
.
3. If you chose
New Entry
, select a number type, and then enter
the new entry name.
– or –
If you chose
Existing Entry
, select an entry to which you want
to save the number, and then highlight a number type and
press .
4. Press
DONE
(left softkey) to save the entry.
Using the External Keypad
1. Unlock the keypad by sliding down.
2. Enter a phone number and touch .
3. Use to select
Save
, then touch .
4. Open the phone and proceed with steps 1-4 in “Saving a
Phone Number” on page 20.
Finding a Phone Number
You can search Contacts entries for phone numbers that contain a
specific string of numbers.
1. Enter four or more digits of the number in standby mode.
(The more numbers you enter, the more specific the search
becomes.)
2. All Contacts entries matching the entered numbers will be
displayed. Highlight an entry and touch to dial the
number.
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing
numbers.
There are two types of pauses available on your phone:
䢇
Hard Pause
sends the next set of numbers when you touch
.
䢇
2-Sec. Pause
automatically sends the next set of numbers after
two seconds.
Note
You can have multiple pauses in a phone number and combine
two-second and hard pauses.
To Next Page
Loading...
Need help?
Power
Connectivity
Camera
Weight and Dimensions
