22 2A. Phone Basics
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Touch
>
Hard Pause
or
2-Sec.Pause
.
3. Enter additional numbers.
4. Touch
>
Save
. Open the phone to save the number in
your Contacts.
– or –
Touch to dial the number.
5. Touch to send the additional number if you selected
Hard Pause
in step 2.
Dialing From the Contacts List
1. From standby mode, touch
>
Contacts
.
2. Select the entry you want to call.
3. Touch to dial the entry’s default phone number.
– or –
To dial another number from the same entry, select the
name and touch , and then select a number and touch
.
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Touch and hold to display “
+
” on your phone screen.
2. Dial the country code and phone number you’re calling, and
then touch . The access code for international dialing
will automatically be dialed, followed by the country code
and phone number.
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone
number beforehand. See “Assigning Speed Dial Numbers” on
page 56.
To use speed dial for locations 2-9:
䊳 From standby mode, press and hold the appropriate key for
approximately two seconds.
Note
When you’re calling from the United States, dial “011,” then the
country code and phone number.
To Next Page
Loading...
Need help?
Power
Connectivity
Camera
Weight and Dimensions
