Certain maintenance work may only be carried out by authorised specialist personnel.
The operator must define and provide rules for the area of responsibility, the authority
and the supervision of personnel for such work in advance.
1.7 Operator's obligations
Only employed qualified and instructed maintenance and installation personnel.
Define rules for the authority and supervision of personnel.
Check all safety devices regularly to ensure they are functioning and complete.
Ensure that scheduled maintenance is carried out as planned.
Inform the manufacturer of any damage that is identified (caused by delivery or
incorrect use).
Provide personnel with the necessary protective equipment.
Replace damaged parts.
Keep the work areas and escape routes clear and in good condition.
Inform yourself of the health and safety regulations applicable at the place of
use.
In a risk assessment, also identify hazards that arise from the specific working
conditions at the place of use.
Implement the knowledge gained from the risk assessment in the form of
instructions.
1.8 Conformity
The device is safely designed and built according to the applicable technical rules.
The device complies with the safety requirements of the following directives:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• ATEX Directive 2014/34/EU
Applied harmonised standards:
• EN ISO 12100:2010-11
• EN ISO 4414:2010-11
• EN 60529:2014-09
• EN 61000-6-1:2019-11
• EN 61000-6-2: 2019-11
• EN 61000-6-3: 2011-09
• EN 61000-6-4: 2011-09
• EN IEC 60079-0:2019-09
• EN 60079-28:2016-04
To Next Page
Loading...
Need help?
General
