Operating manual VISATRON® Oil Mist Detector VN2020 / VN2020 EX
Part number 183001 Version 3.0
ASSEMBLY AND INSTALLATION
6.5 Starting up for the first time
Risk of oil mist explosion
Engine protection not guaranteed!
The oil mist detector may only be started up after all the components have
been completely attached
To establish protection of the engine, start up the oil mist detector for the first
time with the engine stopped.
Failure to comply with the safety instructions may result in major damage to property
or the environment and in serious injury or death.
Familiarise yourself with the basic safety instructions before starting electrical
installation.
Section 2.4 Basic safety instructions
If the oil mist detector is operated in explosion-proof areas, the relevant safety
instructions must be observed.
Section 2.4.1 Safety instructions for potentially explosive
atmospheres
Safe and proper use of the device
Read the operating manual and other documents that accompany the product
carefully and keep them in a suitable place for future reference.
For repair and service work, you must follow the instructions in the operating
manual.
Personal protective equipment
Operating the device or working on the device without protective equipment may result
in serious injury. For the workplace PPE, the following protective equipment must be
used:
DIN EN 388:2016 Protective gloves against mechanical risks, 2341X, and
DIN EN 407:2004 Protective gloves against thermal risks, X1XXXX
Safety glasses in accordance with DIN EN 166 or DIN EN 170
Safety helmet in accordance with DIN EN 397 and DIN EN 50365
ESD safety shoes according to ESD standard DIN EN 61340-5-1
To Next Page
Loading...
Need help?
General
