• select and order spare parts and accessories; and
• find authorised service partners local to you
Hazard warnings, safety regulations and the information in this operating
manual must be observed without exception.
You must read, understand and apply the operating manual in order to operate
and work on the device properly and safely.
This operating manual must be read and applied by the fitter and the
responsible specialist personnel/operator before transport, installation/removal,
starting up, operation and maintenance.
1.4 Document storage
This manual, as well as all other applicable documents, must be kept in a
central place so that they are always available to the qualified personnel at the
place of use.
The documents must be handed over in full to subsequent owners.
1.5 Applicable documents and regulations
Further documents apply and must be observed in conjunction with this operating
manual:
Operating manual for VISATRON
®
VN2020 end user software, currently valid
version (Document No.: Part Number 180115, available on the supplied DVD)
For additional components, the manuals supplied with them must be observed.
When using the device and for all service work, also follow:
• the recognised technical rules for working safely and correctly;
• the statutory accident prevention regulations;
• the statutory environmental protection regulations;
• the provisions of the employers’ liability insurance association;
• the regulations applicable in other countries and the requirements for the
state of the art; and
• the rules and instructions of the operator.
1.6 Qualifications of personnel
Installation, starting up, operation and maintenance of the device may only be carried
out by appropriately qualified personnel.
The operator must therefore ensure that the personnel for the work/activities defined in
this operating manual have the appropriate qualifications and/or are trained and fully
understand the contents of this operating manual.
The following operator qualifications are required for this device:
• completed vocational training as an electrician (electronics technician) or
mechatronics technician, industrial mechanic or equivalent technical
training; and
• instruction by the operator on the instructions for the entire installation on
site.
To Next Page
Loading...
Need help?
General
