Planning the MOBY D system
4.3 Installation guidelines
MOBY D
40 System Manual, 01/2010, J31069-D0147-A6-7618
4.3.3 Metal-free area
The metal-free area for the MDS
Direct mounting of the MDS on metal or flush-mounting in metal is not permitted. If the MDS
is directly mounted onto metal, all functions of the MDS will be disabled.
The minimum distance between the MDS and metal is shown in the appropriate sections
"Metal-free area" of the chapter Mobile data storage units (Page 95).
The metal-free area for the SLG D12/SLG D12S
When mounting the SLG, it is important to note that metal in the vicinity of the antennas can
affect the field data.
To Next Page
Loading...
Need help?
General
