Siemens simovert masterdrives Compendium

Parameterization 03.2010
6SE7087-6QX70 (Version AL) Siemens AG
5-18 Compendium Motion Control SIMOVERT MASTERDRIVES
5.4.3.3 Basic menu
Whe
n the "P" key is pressed, a changeover is made from the operating
display to the basic menu.
0.0 A 0 V 00
# 0.00 min-1
* 0.00
min-1
Ready.
MotionControl
*Menu Selection
OP: Upread
OP: Download
P
 
Display of the basic menu
The basic menu is the same for all units. The following selections can
be made:
♦ Menu selection
♦ OP: Upread
♦ OP: Download
♦ Delete data
♦ Change slave
♦ Config. slave
♦ Slave ID
As not all the lines can be shown at the same time, it is possible to
scroll the display as required with the "Lower" and "Raise keys.
MotionControl
*Menu Selection
#OP: Upread
OP: Download
∇
 
MotionControl
*Menu Selection
OP: Upread
OP: Download
MotionControl
OP: Upread
OP: Download
#Delete data
MotionControl
*Menu Selection
OP: Upread
#OP: Download
MotionControl
OP: Download
Delete data
#Change slave
and so on
∇
 
∇
 
∇
 
Example of switching from one line to the next
The currently active function is indicated by the "*" symbol and the
selected function by the "#” symbol. After the "P" key has been
pressed, the relevant symbol jumps to the selected function. The
"Reset" key is for returning to the operating display.

Siemens simovert masterdrives Specifications

General

Brand	Siemens
Model	simovert masterdrives
Category	DC Drives
Language	English