Siemens simovert masterdrives Compendium

03.2010 Parameterization
Siemens AG 6SE7087-6QX70 (Version AL)
SIMOVERT MASTERDRIVES Compendium Motion Control 5-19
5.4.3.4 Slave ID
With the "Slave ID" function, the user can request information about the
connected slave. The slave ID consists, for example, of the following
lines:
MASTERDRIVES MC
PLUS
6SE7014-0TP50
1.5 kW
V1.0
15.09.1997
Starting from the basic menu, the "Slave ID" function is selected with
"Raise" or "Lower" and activated with "P". As all the lines cannot be
shown at the same time, it is possible to scroll the display as required
with the "Lower" and "Raise" keys. In addition, the slave number is
shown at the top on the right-hand side.
MotionControl 00
Slave ID
MASTERDRIVES MC
PLUS
P
 
MotionControl
Change slave
Config. slave
#Slave ID
MotionControl 00
Slave ID
6SE7014-0TP50
MotionControl 00
Slave ID
1.5 kW
and so on
∇
 
∇
 
∇
 
MotionControl 00
Slave ID
6SE7014-0TP50
Example of a slave ID

Siemens simovert masterdrives Specifications

General

Brand	Siemens
Model	simovert masterdrives
Category	DC Drives
Language	English