Siemens simovert masterdrives Compendium

Parameterization 03.2010
6SE7087-6QX70 (Version AL) Siemens AG
5-6 Compendium Motion Control SIMOVERT MASTERDRIVES
Status (r001) P053 Result
"Ready for ON" (09) 2 P222 Src n(act) can only be changed via the PMU
"Ready for ON" (09) 6
P222 Src n(act) can be changed via the PMU and
SCom1 (e.g. OP1S)
"Operation" (14) 6
P222 Src n(act) cannot be changed on account of
the drive status
Table 5-5 Influence of drive status (r001) and parameter access (P053) on the
changeability of a parameter
5.3 Parameter input via the PMU
The PMU parameterizing unit enables parameterization, operator
control and visualization of the converters and inverters directly on the
unit itself. It is an integral part of the basic units. It has a four-digit
seven-segment display and several keys.
The PMU is used with preference for parameterizing simple
applications requiring a small number of set parameters, and for quick
parameterization.
Lower key
Toggle key
Raise key
Seven-segment display for:
Drive statuses
Alarms and faults
Parameter numbers
Parameter indices
Parameter values
Fig. 5-2 PMU in units of the Compact PLUS type
Examples:
PMU in units of the
Compact PLUS type

Siemens simovert masterdrives Specifications

General

Brand	Siemens
Model	simovert masterdrives
Category	DC Drives
Language	English