– Remove the pre-exhaust pipe with mounting bracket -1- ⇒
Engine; Rep. gr. 26 .
– Install underbody cover on right and left -arrows-.
– Install tunnel bridge -arrows-.
– Mount the plug connection -A-.
– Install the centre console ⇒ Body Work; Rep. gr. 68 .
– Installing the cover for the shift mechanism
⇒ “2.5 Removing and Installing the cover for the shift mecha‐
nism”, page 58 .
Note
Observe measures when disconnecting and connecting the bat‐
tery ⇒ Electrical System; Rep. gr. 27 .
– Connect earth strap of battery ⇒ Electrical System; Rep. gr.
27 .
2.12.3 Removing and installing selector lever
lock solenoid - N110- for Fabia II and
Roomster vehicles as of 11.2011
The selector lever lock solenoid is integrated firmly in the gearshift
mechanism and cannot be replaced separately. To replace, the
gearshift mechanism must be replaced ⇒ page 74 .
2.13 Checking the plug connections at the
gearshift mechanism
• Before repairing or checking the plug connections, try to de‐
termine the origin of the damage as accurately as possible
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
104 Rep. gr.37 - Controls, housing
ProCarManuals.com
To Next Page
Loading...
Need help?
General
