Skoda Fabia II 2011 User Manual

38 – Gears, control
1 Removing and installing oil pan, oil
filter, slide valve body and internal
wiring looms
⇒ “1.1 General Instructions”, page 165
⇒ “1.2 Summary of components - oil pan, oil strainer, slide valve
body, internal wiring looms”, page 165
⇒ “1.3 Components at wiring loom of 8-pin plug”, page 168
⇒ “1.4 Removing and installing oil pan”, page 168
⇒ “1.5 Removing and installing the oil filter”, page 170
⇒ “1.6 Removing and installing the slide valve body”, page 171
⇒ “1.7 removing and installing wiring loom with 14-pin plug”, page
180
⇒ “1.8 Removing and installing wiring loom with 8-pin plug and
integrated gearbox oil temperature sender G93 ”, page 181
⇒ “1.9 Removing and installing the gearbox input r.p.m. sender
G182 ”, page 183
⇒ “1.10 Removing and installing the gearbox output r.p.m. sender
G195 ”, page 184
1.1 General Instructions
WARNING
Do not run the engine or tow the vehicle when the oil pan has
been removed or without filling with ATF in the gearbox.
Note
♦ Always replace soiled or faulty slide valve bodies.
♦ ⇒ “2 Information and repair instructions for the automatic gear‐
box 09G”, page 12 .
♦ Coat O-rings and gasket rings with ATF. Other types of lubri‐
cant will cause the gearbox hydraulic control system to mal‐
function.
♦ The slide valve body and the wiring looms with 8-pin and 14-
pin plug can also be removed with the installed gearbox.
1.2 Summary of components - oil pan, oil strainer, slide valve body, internal
wiring looms
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
1. Removing and installing oil pan, oil filter, slide valve body and internal wiring looms 165
ProCarManuals.com

Skoda Fabia II 2011 Specifications

General

Brand	Skoda
Model	Fabia II 2011
Category	Automobile
Language	English