Tighten warm-type clamp -arrow- using the hose binding claw .
Note
♦
The selector lever is only correctly secured when the gripper
clamp is under tension. Only then the lock button at the handle
may be pressed on.
♦
The lock button can only show high resistance when it is
pressed on for the first time after installing the selector lever
handle.
– Press the lock button onto the selector lever handle.
– Installing the cover for the shift mechanism
⇒ “2.5 Removing and Installing the cover for the shift mecha‐
nism”, page 58 .
– Inspect gearshift mechanism
⇒ “2.2 Inspecting the gearshift mechanism”, page 54 .
2.8 Installing the lock button at the selector
lever handle
Special tools and workshop equipment required
♦ Release tool - T40203-
Work procedure
• The lock button -2- on the selector lever handle protrudes
when it is in the installation position.
Note
If the lock button -2- was inadvertently pressed in, it must then be
repositioned in order to fit the selector lever handle.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
72 Rep. gr.37 - Controls, housing
ProCarManuals.com
To Next Page
Loading...
Need help?
General
