Skoda Fabia II 2011 User Manual

13 - Gearbox input r.p.m. sender - G182-
❑ with cable and 2-pin plug connection
❑ ⇒ “1.9 Removing and installing the gearbox input r.p.m. sender G182 ”, page 183
14 - Screw
❑ 7 Nm
15 - Gearbox output r.p.m. sender - G195-
❑ with cable and 2-pin plug connection
❑ ⇒ “1.10 Removing and installing the gearbox output r.p.m. sender G195 ”, page 184
16 - Gearbox housing
17 - ATF bleeder
18 - ATF radiator
❑ ⇒ “5.2 Removing and installing ATF radiator”, page 159
19 - Multi-function switch - F125-
❑ ⇒ “2.1 Removing and installing the multi-function switch F125 ”, page 185
❑ ⇒ “2.2 Setting multi-function switch F125 ”, page 187
❑ is checked by self-diagnosis
20 - Sealing ring
❑ replace ⇒ Electronic Catalogue of Original Parts
21 - ATF drain plug
❑ 40 Nm
22 - Lever
❑ for inside selector lever shaft at the slide valve body
❑ ⇒ “1.6 Removing and installing the slide valve body”, page 171
23 - Washer
24 - Nut
❑ Pay attention to fitting location of the nut
⇒ “1.6 Removing and installing the slide valve body”, page 171
❑ 10 Nm
25 - Large spring
26 - Small spring
27 - Shock absorber piston
28 - Wiring loom with 8-pin plug and integrated gearbox oil temperature sender - G93-
❑ with O-ring at connector
❑ Replace O-ring ⇒ Electronic Catalogue of Original Parts
❑ ⇒ “1.8 Removing and installing wiring loom with 8-pin plug and integrated gearbox oil temperature sender
G93 ”, page 181
❑ ⇒ “1.3 Components at wiring loom of 8-pin plug”, page 168
29 - Screw
❑ 6 Nm
30 - Wiring loom with 14-pin plug
❑ with O-ring at connector
❑ Replace O-ring ⇒ Electronic Catalogue of Original Parts
❑ ⇒ “1.7 removing and installing wiring loom with 14-pin plug”, page 180
31 - Screw
❑ 6 Nm
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
1. Removing and installing oil pan, oil filter, slide valve body and internal wiring looms 167
ProCarManuals.com

Skoda Fabia II 2011 Specifications

General

Brand	Skoda
Model	Fabia II 2011
Category	Automobile
Language	English