Skoda Fabia II 2011 User Manual

Torque converter on the driver plate
Component Tightening torque
Torque converter to drive plate, 3 nuts
1)
-arrow-
57 Nm
1)
Replace nuts ⇒ Electronic Catalogue of Original Parts .
All other bolted connections
Component Nm
Screws/nuts M6 10
M8 20
M10 45
M12 65
3.4 Transporting an automatic gearbox
Special tools and workshop equipment required
♦ Shackle - 10-222A/12-
Work procedure
For transporting the automatic gearbox, the shackle - 10-222A/
12- can be used.
– Secure torque converter against dropping out when transport‐
ing.
– Attach shackle - 10-222A/12- to gearbox housing.
3.5 Attaching gearbox to assembly stand
Special tools and workshop equipment required
♦ Engine and gearbox mount - MP1-202- (as -VW540- , however
for assembly stand -MP9-101- )
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
3. Removing and installing the gearbox 145
ProCarManuals.com

Skoda Fabia II 2011 Specifications

General

Brand	Skoda
Model	Fabia II 2011
Category	Automobile
Language	English