EasyManuals Logo
Home>Sony>Camcorder>PMW-EX3

Sony PMW-EX3 User Manual

Sony PMW-EX3
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Backup Battery
14
4
Appendixes
8 Select “Store” and specify the file in
which you wish to store the data.
9 When the confirmation message is
displayed, select “Execute.”
If the lens is a serial lens, the corresponding lens
file is automatically retrieved when you next
mount the lens, as long as “Auto Recall” is set to
“On.”
If the lens is a non-serial lens or if “Auto Recall”
is set toOff, retrieve the corresponding file
with a menu operation (Recall) when you next
mount the lens.
To change the file name
The initial file names (User_File1 to User_File4)
can be changed with “File ID” of the menu (up to
16 characters).
To clear the compensation data
The compensation data of the current lens file can
be cleared to the factory-set values by selecting
“No Offset” from the menu.
For details on menu operations, see “Basic Menu
Operations” on page 111.
This camcorder uses a backup battery to retain
various setting data.
A lithium battery (CR2032) for backup is
mounted in the camcorder at the factory.
The backup battery retains the date, time, and
timecode in Free Run mode even when no
operating power is being supplied.
Service life of the backup battery
When the backup battery’s voltage falls, the
backup battery low-voltage warning appears in
the viewfinder.
If this warning appears, replace the battery as
soon as possible.
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in
fire.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Replacing the backup battery
Notes
Be sure to set the power switch to OFF when
replacing the backup battery.
Be careful not to drop the removed screw into
the camcorder.
1 Open the cover of the backup battery
holder on the bottom by loosening the
screw, and remove the battery.
00:00
A
uto
FB
ADJ
File
Fla
r
e
S
hading :
U1:
U
ser_Fi le 1
:
O
n
LENS
Lens
I
D
R
ecal l
S
tore
File
I
D
N
o
O
ffset
A
uto
R
ecal l
B
B
B
YH
1
2
x
4
.
8
I
RS
B
B
00:00
A
uto
FB
ADJ
File
Fla
r
e
S
hading
VC
L
-
6
1
4
B
2
X
XS
8
X4AS
-
XB
8
U
ser_Fi le 1
U
ser_Fi le 2
U
ser_Fi le 3
U
ser_Fi le 4
:
:
LENS
Lens
I
D
R
ecal l
S
tore
File
I
D
N
o
O
ffset
A
uto
R
ecal l
B
B
B
B
B
Backup Battery
WARNING
CAUTION

Table of Contents

Other manuals for Sony PMW-EX3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony PMW-EX3 and is the answer not in the manual?

Sony PMW-EX3 Specifications

General IconGeneral
Digital zoom0 x
Optical zoom14 x
Image stabilizerYes
Focal length range5.8 - 81.2 mm
Focal length (35mm film equivalent)31.4 - 439 mm
Sensor typeCMOS
Total megapixels0 MP
Optical sensor size1/2 \
Display diagonal3.5 \
InterfaceUSB
Resolution1920 x 1080 pixels
Expansion slotsExpressCard/34 (x 2)
Power requirementsDC 12V
Power consumption (typical)13.5 W
Camera shutter speed1/33 - 1/2000 s
Minimum illumination0.14 lx
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Maximum memory card size32 GB
Product colorBlack
Battery typeBP-U30/BP-U60
Battery life (max)- h
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Depth400 mm
Width250 mm
Height210 mm
Weight1900 g

Related product manuals