3. Lubrication System
3-2
Precautions in Operation
Be careful not let dirt enters into engine or oil hoses when removing or installing the oil pump.
If air is found in the oil tube (from oil tank to oil pump) or oil tube is removed, the oil pump should be
conducted air-bleeding operation.
It should bleed the oil output tube (from oil pump to carburetor) as hose removed.
The adjustments of oil pump control cable.
Lubricant
Appointed to apply SAE 20 JASO FC class oil . Otherwise, warranty shall not cover the damage.
Recommended oil : MAX-2 oil.
Oil tank capacity: 1.2lit.
Trouble Shooting
Too much smoke, carbon in spark plug
1. Improperly oil pumps adjustment (too much oil).
2. Poor quality oil.
3. Applying with poor quality oil.
Over heat
1. Improperly oil pumps adjustment (insufficient oil).
2. Poor quality oil.
3. Applying with poor quality oil.
Piston seized
1. No oil in oil tank or clogged hose.
2. Improperly oil pumps adjustment (insufficient oil).
3. Air in oil hose.
4. Malfunction of oil pump.
Oil did not flow out the oil tank
1. Clogged breath hole on the oil tank cover.
To Next Page
Loading...
Need help?
General