0B0BZ00
FOREWORD
This manual, which is written for engineers who service the machine, describes procedures for disassembly and assem-
bly, inspection and maintenance, and troubleshooting, as well as maintenance reference values and an outline of the
specifications. Refer to this manual during daily work to improve your services. Note that the information is subject to
change without notice due to design modifications made to the machine from time to time by the manufacturer.
Directional terms: front, rear, left, right
In this manual, front and back/left and right are based on ori-
entations when sitting in the driver’s seat with the blade be-
ing at the front.
Machine serial number
The machine serial number is stamped on the identification
plate. Be sure to include this number when sending a report
or inquiry or when ordering parts.
Symbols used in this manual
The symbols used in this manual have the following mean-
ings.
Indicates the machine serial number.
Means “Refer to the section quoted.”
Indicates the mass of the equipment or machine.
Means “Tighten to the torque specified here.”
Indicates the use of thread-locking compound. (Three-
Bond #1324, or an equivalent)
Indicates the use of grease. (Lithium grease EP2/NLGI
No.2)
Manual structure
This manual consists of the following parts.
1. Safety
2. Service data
3. Function
4. Disassembly and assembly
5. Troubleshooting
6. Other
0B0BZ01
FRONT
VORN
AVANT
๓
RIGHT
RECHTS
DROITE
ྑ
LEFT
LINKS
GAUCHE
ᕥ
REAR
HINTEN
ARRIERE
ྡྷ
To Next Page
Loading...
Need help?
General
