GTS Technical Manual
5. March 2013 Edition: V1.10/2013 5-33
Copyright © 2013, Diversey Inc.
05.40.15 squeegee - front blade old set up - 455B_455E_755B eco_755E_755B power_855B power_V1.10.fm
5.6 Squeegee
5.6.4 Mounting of front blade old setup
• Position new front blade.
Picture 44: Front blade position
• Position tightening strap.
• Untighten fixation screw until the blade is properly fixed on the
squeegee body.
Picture 45: Tightening strap position front
Remarks
Pay attention that the tightening strap is positioned in the centre.
Ensure that the tightening strap is positioned correct (thin part to the
bottom).
If you over tighten the tightening strap it can bulge.