GTS Technical Manual
5. March 2013 Edition: V1.10/2013 5-35
Copyright © 2013, Diversey Inc.
05.40.20 squeegee - back blade old set up - 455B_455E_755B eco_755E_755B power_855B power_V1.10.fm
5.6 Squeegee
5.6.6 Mounting of back blade old setup
• Position new back blade.
Picture 49: Back blade position
• Position tightening strap.
• Tighten fixation screws until the blade is properly fixed on the
squeegee body.
Picture 50: Tightening strap position back
Remarks
Pay attention that the tightening strap is positioned in the centre.
Ensure that the tightening strap is positioned correct (thin part to the
bottom).
If you over tighten the tightening strap it can damage the squeegee
body.