Tektronix TDS 200-Series User Manual

TDS 200-Series Digital Oscilloscope User Manual
103
Appendix B: Accessories
All accessories (standard and optional) are available by contacting
your local Tektronix field office.
Standard Accessories
P2100 1X, 10X Passive Probes. The P2100 passive probes
have a 7 MHz bandwidth with a rating of 150 V CAT II when the
switch is in the 1X position, and a100 MHz bandwidth with a
rating of 300 V CAT II when the switch is in the 10X position.
TDS 200-Series Oscilloscope User Manual. A single User
Manual is included. Refer to the Optional Accessories for a
complete list of available language manuals.
Optional Accessories
TDS2MM Measurement Extension Module. The TDS2MM
module plugs directly into the rear panel of any TDS 200-Series
oscilloscope. This module provides full GPIB and RS-232
compatibility and a Centronics port for hard copy output. The
module allows measurement of rise time, fall time, and positive
and negative pulse width. The module also provides Fast Fourier
Transform (FFT).
TDS2CM Communications Extension Module. The
TDS2CM Communications module plugs directly into the rear
panel of any TDS 200-Series oscilloscope. This module provides
full GPIB and RS-232 compatibility and a Centronics port for hard
copy output.

Tektronix TDS 200-Series Specifications

General

Brand	Tektronix
Model	TDS 200-Series
Category	Test Equipment
Language	English