Field Description
The function is activated by selecting ,.
The function is enabled by default.
ARP Processing Select whether the ARP processing function should be enabled.
The ARP data traffic is reduced in the network by the fact that
ARP broadcasts that have been converted to ARP unicasts are
forwarded to IP addresses that are known internally. Unicasts
are quicker and clients with an enabled power save function are
not addressed.
The function is activated by selecting ,.
The function is disabled by default.
Make sure that ARP processing cannot be applied together with
the MAC bridge function.
WMM Select whether voice or video prioritisation via WMM (Wireless
Multimedia) is to be activated for the wireless network so that
optimum transmission quality is always achieved for time-critical
applications. Data prioritisation is supported in accordance with
DSCP (Differentiated Services Code Point) or IEEE802.1d.
The function is activated by selecting ,.
The function is enabled by default.
Fields in the menu Security Settings
Field Description
Security Mode
Select the security mode (encryption and authentication) for the
wireless network.
Possible values:
• " (default value): Neither encryption nor authentica-
tion
• 8 : WEP 40 bits
• 8 : WEP 104 bits
• 8-*>: WPA Preshared Key
• 8- )#: 802.11x
13 Wireless LAN Controller Teldat GmbH
176 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
