TP04300 Series Interface & Applications Manual A-1
AMaterials Safety Data
. .
. .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sheets
MSDS Overview
Introduction The Materials Safety Data Sheets (MSDS) for storing, handling, or disposing the following
fluids used in the System are presented in this Chapter.:
WARNING
WARNING 10: See the Material Safety Data Sheet (Appendix A) for safety precautions when
storing, handling, or disposing any coolant fluids.
WARNING 11: Dispose of any new or removed coolant fluid (or handle any related vapor
discharge) in accordance with the established policies and procedures for that material.
WARNING 9: If service of the Cooler/Circulator is required, only a licensed refrigeration
service person certified by the Temptronic Corporation is qualified to perform any charging or
handling of the refrigerants in the System. Service by unqualified persons can cause warranties
to be voided.
WARNING 18: Only use the coolants (heat transfer fluids) and refrigerants specified by the
manufacturer: they are carefully engineered to be safe for operating personnel, to be friendly to
the environment, to operate efficiently, and to not harm the equipment. Do not substitute
unauthorized coolants and refrigerants, nor mix (add) in unauthorized coolants or refrigerants:
doing so can cause warranties to be voided. Wear protective safety eye glasses, gloves, and
apron when filling coolants and refrigerants. Temptronic assumes no liability for damages
caused by use of unauthorized coolants and refrigerants.
MSDS in TP04300 ThermoStream
Interface & Applications (manual LM01980)
50Hz Chiller 60Hz Chiller Air Dryer Desiccants
POE Oil POE Oil Molecular Sieve 4A-50
HFC Refrigerant
Blend
HFC Refrigerant Blend Activated Aluminas
To Next Page
Loading...
Need help?
General
