Temptronic ThermoStream TP04300 Series User Manual

. . . . .
ROUTINE MAINTENANCE
Sensor Calibration: Type T, Type K Thermocouples (DUT Mode)
TP04300 Series Interface & Applications Manual 5-25
Sensor Calibration: Type T, Type K Thermocouples (DUT Mode)
Introduction to Type
T and Type K
Thermocouple
Calibration
The sensor calibration procedures for Type T and Type K Thermocouples are identical.
There are 2 methods for calibrating the sensors:
• Calibrator
• External Sensor
Calibrator is the recommended method. This method uses an external voltage source (or
Calibrator) as the primary reference. The Calibrator inputs millivolt values for high and low set
points.
External Sensor is used for unique applications. It is recommended that you contact a
Temptronic representative before calibrating with this method.
This method uses an external temperature sensor as a primary reference.
Once the Sensor has been chosen from the Calibration Select Sensor Screen, the following
dialog box will appear:
1980_503.jpg
Calibrator Method
(Type T, Type K)
1980_504.jpg

Temptronic ThermoStream TP04300 Series Specifications

General

Brand	Temptronic
Model	ThermoStream TP04300 Series
Category	Industrial Equipment
Language	English