Micro-Master Touch User Guide
101
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
14.6.3 Digital Edit
The Digital Sensor Edit screen is displayed by pressing the icon on the Digital Sensor List
screen.
Figure 73 - Digital Sensor Edit
Digital Sensor Name
Each Digital Sensor can be assigned a name. Names are limited to 20 characters. Selecting the
name button and clicking Edit will display the Text Edit screen.
Digital Sensor Enabled
Digital Inputs can be enabled or disabled. Clicking on the tick (cross) will change the Digital Sensor
to disabled (enabled).
Digital Sensor Scan Delay
Digital Inputs can have a scanning delay. Selecting the Scan Delay item and clicking Edit will display
the Number Edit screen.
Digital Sensor Status
This item shows the current position of the digital sensor. The item will show either open or closed.
To Next Page
Loading...
Need help?
General
