Toro Micro-Master Series User Manual

Micro-Master Touch User Guide
107
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
14.8.2 Analogue List
The Analogue Sensor List screen is displayed by pressing the icon on the Sensor Selection
screen.
Figure 78 - Analogue Sensor List
Analogue Sensor Names and Status
Each line in this list displays the name of the Analogue (if assigned) and the current status of the
Analogue. Clicking on a name will select the Analogue, changing the background of the selected
Analogue to light blue. Selecting a Analogue and then clicking Edit will display the Analogue Edit
screen.
Analogue Sensor Status Icons
The status of each Analogue Sensor is shown graphically using different icons.
Indicates an Analogue Sensor is empty or is disabled. An empty Analogue
Sensor displays "** Empty **", a disabled Analogue Sensor displays the name of
the Analogue Sensor.
Indicates an Analogue Sensor is idle. An Analogue Sensor is idle when the
measured analogue value is zero.
Indicates an Analogue Sensor is active. An Analogue Sensor is active when the
measured analogue value is not zero.
Indicates an Analogue Sensor is triggered. An Analogue Sensor is triggered when

Toro Micro-Master Series Specifications

General

Brand	Toro
Model	Micro-Master Series
Category	Controller
Language	English