Micro-Master Touch User Guide
68
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
Pump Set Enable
Pump Sets can be enabled or disabled. Clicking on the tick (cross) will change the Pump Set to
disabled (enabled).
Pump Station Enable
Individual Pump Stations can be enabled or disabled. Clicking on the tick (cross) will change the
Pump Station to disabled (enabled).
11.4
Pump Set Advanced Parameters
There are three advanced setting pages for each pump set. Page 1 sets the pump delays. Page 2
allocates a flow meter for the pump. The flow meter does not have to be different for each pump set.
The same flow meter can be used for any, or all programs, chemicals, and pump sets Page 3 shows
the current status and totals for the pump set.
Pump Set Delays
The Delays screen is the first page of Advanced Pump Set Parameters and is displayed by pressing
the icon on the Pump Set Edit screen.
Figure 45 - Pump Set Advanced Parameters Edit - Page 1
Delay Times
Clicking on a pump delay item will select the item, changing the background of the selected item to
light blue. Selecting an item and then clicking Edit will display the Number Edit screen.
To Next Page
Loading...
Need help?
General
