User’s Manual 1-7
Getting Started & Grand Tour
Suspend Mode
If you have to interrupt your work, you can turn off the power without exiting
from your software by placing the device into Suspend Mode.
Executing Suspend Mode
You can enter Suspend Mode in one of the following ways:
■ Simply press the power button.
■ Select Suspend from the Device options menu.
When you turn the power back on, you can continue where you left when
the system went into Suspend mode.
Resuming from Suspend Mode
You can resume from Suspend Mode in one of the following ways:
■ Press the power button.
■ Press the Home key ( ).
■ Open the LCD lid.
Turn the LCD off/on
You can turn the LCD off (while the system is still on) in the following ways:
■ Close the LCD lid.
■ Set the screen timeout in the Settings.
To turn the LCD on, please follow the ways below:
■ Open the LCD lid.
■ Press any key on the keyboard.
■ Before entering Suspend Mode, be sure to save your data.
■ Do not remove the battery pack while the device is in Suspend Mode
unless the device is connected to an AC power source. Data in
memory could be lost.
To Next Page
Loading...
Need help?
General